0
Apart from the usual screwdrivers / pliers / socket sets / timing light / axle stands etc , heres a few tools i have found to be very useful for working on my dub (and others too) 
Pipette
Very useful tool for removal of brake fluid and other fluids.
DeadBlow Hammer
Great for persuading brake drums off that are stuck without much risk of damage to the drum.
Griping Pliers
These are great for rounded off brake pipe unions / nipples / bolts as they grip tighter the more you turn. Nearly always removes stubborn fixings allowing replacement.
Brake Shoe Hold Down Tool
Does not look much but good for holding the shoe hold down clips and twisting them on easily.
Pipe Clamps
Easily and safely shut off rubber pipes (fuel / brake hose etc) without risk of damage while working.
S-Shaped Spanners
Extremely useful for tight spots such as around the carb nuts
Ratchet Spanners
Easy to use and a great time saver. Everyone should have a set of these.
Magnetic Telescopic Pickup
Excellent for retrieving small metal parts you drop (nuts / washers etc) where you shouldnt.
Large Grips
Useful for a variety of purposes.
Large BallJoint Fork
A bit brutal (the joint will probably be damaged) but an easy way to separate ball joints that need replacement anyway.
Flexible Claw Pickup
Great for when you drop something and cant get your hand in to reach it. The stem is very flexible allowing you to reach into small spaces with ease.
Large Prybar
Useful for several jobs when a bit of extra leverage is needed.
Ball Joint Removers
Easy to use tools to remove ball joints.
Pipette
Very useful tool for removal of brake fluid and other fluids.
DeadBlow Hammer
Great for persuading brake drums off that are stuck without much risk of damage to the drum.
Griping Pliers
These are great for rounded off brake pipe unions / nipples / bolts as they grip tighter the more you turn. Nearly always removes stubborn fixings allowing replacement.
Brake Shoe Hold Down Tool
Does not look much but good for holding the shoe hold down clips and twisting them on easily.
Pipe Clamps
Easily and safely shut off rubber pipes (fuel / brake hose etc) without risk of damage while working.
S-Shaped Spanners
Extremely useful for tight spots such as around the carb nuts
Ratchet Spanners
Easy to use and a great time saver. Everyone should have a set of these.
Magnetic Telescopic Pickup
Excellent for retrieving small metal parts you drop (nuts / washers etc) where you shouldnt.
Large Grips
Useful for a variety of purposes.
Large BallJoint Fork
A bit brutal (the joint will probably be damaged) but an easy way to separate ball joints that need replacement anyway.
Flexible Claw Pickup
Great for when you drop something and cant get your hand in to reach it. The stem is very flexible allowing you to reach into small spaces with ease.
Large Prybar
Useful for several jobs when a bit of extra leverage is needed.
Ball Joint Removers
Easy to use tools to remove ball joints.
